AVAILABLE MODELS (THREE (3) PHASE - SPECIFY VOLTAGE)
900 CFM RECLAIM WITH D-20 DUST COLLECTOR - BIA 72P-2
900 CFM RECLAIM WITH M4 DUST COLLECTOR - BIA 72P-M4
900 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH DRAWER - BIA 72P-3
900 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH HOPPER - BIA 72P-4
1200 CFM RECLAIM WITH M6 DUST COLLECTOR - BIA 72P-M6
1200 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH DRAWER - BIA 72P-5
1200 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH HOPPER - BIA 72P-5-1
1200 CFM RECLAIM WITH RPJ2 DUST COLLECTOR WITH HOPPER - BIA 72P-6
A one (1) Cu. Ft. capacity, ASME certified pressure pot is supplied. Pot is equipped with 3/4" piping, pilot/slave regulator, moisture separator, outlet valve, media valve, and all related controls for efficient operation. Blast is delivered to the part through 1/2" blast hose and a 1/4" Tungston Carbide nozzle. Pictured with D20 Dust Collector.
The Cube is designed and equipped to effectively blast large items with a variety of blasting media. High static fans available for heavy media. The operator accesses the blast area from outside the Cube through glove ports to direct blast pattern at the items. Blast pattern may be from a venturi suction gun or pressure blast.
Constructed of high quality reinforced steel.
Heavy duty removable grate of 9 gauge, flattened, expanded metal.
One, full opening, double walled, swing type. Full perimeter gasket with knife edge sealing. Self adjusting door latches.
Full length, cloth lined, abrasive and static resistant. Screw clamp mounted, for easy replacement, to a 10" elongated, padded port.
Large, 12-1/2" x 21", tempered glass provides long life and minimized static build up of dust.
One, 4 tube 48" flourescent fixture, shielded, and externally located on top of the machine. CONTROLS: Dual on/off switches for blower and lights. Safety Door Switch allows blasting only when the door is closed. Blast is controlled by a foot activated control.
A fingertip controlled air blow-off nozzle allows cleaning of the work inside the cabinet.
All air and media hoses are lightweight, flexible, and abrasive resistant. Flex hose is abrasive and static resistant.
A 230/460 Volt, 60 Hz, 3 Phase, service is required. Alternate voltages are available. NOTE: Specify voltage on purchase order.
A durable corrosion resistant enamel, grey in color, is used internally and externally.
Air (approximate) Requirements40 PSI 60 PSI 80 PSI 3/16" nozzle 21 CFM32 CFM 41 CFM 1/4" nozzle 41 CFM56 CFM 72 CFM 5/16" nozzle 64 CFM88 CFM 113 CFM
Turntable & Track Assemblies
Additional Full Size Door
Power Operated Vertical Door
3' x 3' Service Door
Wear Kit - Reclaim Wear Plate, Tungsten Carbide Nozzle, Rubber Curtains (Sides & Back)