Cube Blast Cabinets
AMS
Abrasive Blast Cabinets

1-413-566-0037
American Manufactured Since 1971
Industrial Blast Cabinets built for Production, Versatility , Ease of Operation and Low Maintenance.

Industrial Blast Cabinets Series are the most feature rich Blasting Cabinets in the line up. Cabinets are offered in Single and Dual Work Station along with the Cube Blast cabinet for processing large parts. Cube models are offered in Standard and Special model options. Various Voltage options are available. All Industrial Series Cabinets are equipped with the Electronic Door Safety Lockout System and Ergonomic Foot Valve: For instant Changing from right to left foot On/Off Air Logic Controls. All models are available in Suction or Pressure Abrasive delivery systems. Set in turn tables, loading tracks with cart mounted turntables are available for efficiency improvements in component loading and blasting.

Industrial Blast Cabinets Home
Industrial Pressure Blaster Series
Single Work Station Suction Blast Cabinets
Single Work Station Pressure Blast Cabinets
Double Work Station Suction Blast Cabinets
Cube Pressure Blast Cabinets
Cube Suction Blast Cabinets
Double Work Station Pressure Blast Cabinets
Suction or Pressure Abrasive Blasting Cabinets ?
SUCTION BLAST CABINET Suitable for Most applications.
The Suction Blast System uses the venture principal, incorporating an air jet one half the inside diameter of the nozzle. This creates a negative pressure that sucks the media into the gun body from the hopper.  A Suction Blast System can operate continuously without shutdowns to refill media and can be easily automated with multiple gun bodies. Siphon Blast: A term used to describe the type of abrasive delivery system used on an abrasive blasting cabinet. A siphon machine uses an injection gun to create suction on the abrasive supply hose. The abrasive hose then conveys the abrasive, using suction or siphon, to the gun where the compressed air hose is used to accelerate the abrasive. All siphon type machines include two hoses on the abrasive blast gun assembly. Siphon machines are the most common type of blast machine. All siphon gun assemblies include an air jet used to create the siphoning effect and also establish the amount of compressed air required to operate the machine
Pressure Blast Cabinet: Typically used in High Production. Large volume output applications.

PRESSURE BLAST CABINETS
Because pressure cabinets deliver blast media at higher velocities than suction systems, the pressure cabinet is ideal for turning out work fast. In many applications, these pressure cabinets will perform jobs four-times faster than suction systems. In addition, they use compressed air more efficiently and provide more precise blasting control at high and low operating pressures. For really demanding tasks, like removing tight mill scale or finishing hard-to-reach surfaces, a pressure system is normally the only practical choice. Direct Pressure: Direct Pressure Blast machines use a pressure vessel to pneumatically push the blast media through a single abrasive hose and out the blast nozzle. Direct Pressure machine are capable of operation with heavy abrasive, steel shot or steel grit capable pressure machines are found under steel shot peen models, in addition to most other abrasive blast types and sizes.

BAG COLLECTORS
                            Dust Collection Options

Dust bag collection method is the least expensive start up cost yet the most expensive in time wasted efficiency both in labor time and the mess maintenance creates manual shaking the dusty bags and emptying. Enclosed cabinets represent the best in dust control options include the D series that incorporate a series of dust bags that the operate pushes a button to shake the bags dust is emptied into the 5 gallon pail mounted under the unit by opening a gate to release the dust. Tine M series Dust Collectors are Automated shaker systems that empty the dust into a 5 gallon pail. The M Series removes the operator from the dust collection process. The system monitor filter clogging and shoots a Air Pulse into the cartridges for dust removal
Cartridge Dust Collector Filter
Dust Bag Hangs From Reclaimer Manual Mantenence
D-20 (49 Bag ) Dust Collector Operate with 900 CFM Reclaimers
HEPA Filter
M2 (2) Cartridge Automatic Dust Collector Removes Operator from the task of dust monitoring.
M4 automatic dust collector with silencer.
Pressure Pot Model Reclaimer and Dust Bag
Pressure Cabinet 900 CFM Reclaimer D-20 Dust Collector
RPJ Vertical Cartridge Filter requires 11 feet tall  working area
Dust bag hangs from reclaimer. This is the least start up costs but the most expensive over time. The operator must manual shake the bag and empty the dust. A messy job "unavoidably".

MATERIAL: COTTON SATEEN

WEIGHT 9.6 OZ PER SQ YD.

THREAD COUNT: 96 X 60

AIR PERMEABILITY: 10 TO 20 CFM

CONSTRUCTION: ALL SEAMS OVERLAP

ATTACHMENT: SCREW TYPE CLAMP

(11-415) DUST BAG 300 - 400 CFM (18" DIAMETER X 56" LONG)

SINGLE BAG CONSTRUCTION

  5" INLET 25 SQ FT OF FILTRATION

(11-715) DUST BAG 600 - 700 CFM (18" DIAMETER X 70" LONG

DOUBLE BAG CONSTRUCTION

6" INLET 30 SQ FT OF FILTRATION

DC-10 Dust COLLECTORS
DC-10 Dust Collector Operator Pushes Button On Cabinet to Shake bags periodically during the blasting cycle. Dust is dropped into 5 gallon pail by opening a gate at the bottom of the DC-10 Dust Collector
D SERIES COLLECTORS: ELLIMINATE THE TIME CONSING MANUAL DUST MANAGEMENT PROCESS ALLONG WITHE THE EMSS PUSH BUTTON SHAKER . OPEN THE GATE IN THE BOTTOM OF THE DUST CABINET DUST DROPS INOT 5 GALLON PAIL.

TWO SIZES ARE AVAILABLE D-10 & D-20

BLASTING BY-PRODUCTS ARE COLLECTED IN A SERIES OF VERTICALLY MOUNTED, CLOSED END, DUST BAGS SUSPENDED ON A SPRING MOUNTED HOLDER. THE DUST BAGS ARE HOUSED IN A METAL CABINET CONSTRUCTED OF HIGH QUALITY STEEL, WITH A CORROSION RESISTANT ENAMEL FINISH. DUST IS SHAKEN FROM THE BAGS BY A HIGH FREQUENCY VIBRATOR MOUNTED ON THE BAG HOLDER. STANDARD CONTROL OF THE SHAKER MECHANISM IS BY A MANUALLY OPERATED AIR SWITCH, OR BY AN OPTIONAL AUTOMATIC SHAKER CONTROL. DUST REMOVED BY THE SHAKING PROCESS IS DEPOSITED IN THE DUST SUMP. DUST AND BLASTING BY-PRODUCTS ARE EASILY REMOVED FOR DISPOSAL BY A SLIDE VALVE LOCATED AT THE BOTTOM OF THE SUMP.



D-10 PULL THROUGH:Specifications

FOR (700CFM) RECLAIMER

42" W X 25" D X 80" H

1 HP MOTOR

MANUAL PNEUMATIC BAG SHAKER

25 DUST BAGS (11-349)

DC-20 Dust Collector
DC-20 Dust Collector Operator Pushes Button On Cabinet to Shake bags periodically during the blasting cycle. Dust is dropped into 5 gallon pail by opening a gate at the bottom of the DC-20 Dust Collector
D-20 PULL THROUGH: Specifications

FOR (900CFM) RECLAIMER

52" W X 33" D X 80" H

2 HP MOTOR

MANUAL PNEUMATIC BAG SHAKER

49 DUST BAGS (11-349)

M Series  Automated Cartridge Dust Collectors

THE M SERIES COLLECTORS ARE OF CARTRIDGE TYPE WITH AUTO CLEANING AND ARE DESIGNED AND BUILT FOR CONTINUOUS DUTY OPERATION. THE UNITS ARE DESIGNED FOR USE WITH ABRASIVE BLAST SYSTEMS.PULSE CLEANING: AN ADJUSTABLE TIMER FOR CONTROLLING THE "ON" AND "OFF" TIME OF THE AIR PULSE IS ENCLOSED IN A NEMA-12 CONTROL PANEL. A MAGNAHELIC GAUGE IS PROVIDED FOR MONITORING THE DIFFERENTIAL PRESSURE DROP.

AUTOMATION REMOVES THE OPERATOR FROM THE DUST MONITORING AND SHAKE OUT PROCESS. DUST EMPTIES INTO 5 GALLON PAIL OR UP TO A 55 GALLON BARRELL IN THE RPJ SERIES.

M-2: APPROXIMATELY 36" L X 18" W X 90" H WITH LEGS FOR 5 GALLON DUST DRUM
M-4: APPROXIMATELY 47" L X 36" W X 90" H WITH LEGS FOR 5 GALLON DUST DRUM
AIR FLOW: M-2 400 & 700 CFM & M-4 900 CFM
CONSTRUCTION: STANDARD CONSTRUCTION OF THE UNIT IS 11 GAUGE HOT ROLLED STEEL, REINFORCED TO MAINTAIN STRUCTURAL INTEGRITY TO 15" W.G. ALL WIRING, AIR PIPING, SOLENOIDS AND VALVES ARE MOUNTED EXTERNALLY. INLET SIZES 6" THROUGH 8".


FILTER CARTRIDGES: FILTERS ARE REPLACEABLE CARTRIDGES. EACH FILTER HAS APPROXIMATELY 103 SQUARE FT OF FILTER MEDIA. P/N: (011519).

 NUMBER OF CARTRIDGES: THIS COLLECTOR IS FITTED WITH TWO FILTER CARTRIDGES. CARTRIDGES ARE CHANGED FROM THE OUTSIDE OF THE UNIT.


EXHAUSTER:

M-2: 400 CFM 1/2 HP 120 VOLT SINGLE PHASE  

M-2: 700 CFM 1 HP 120 VOLT SINGLE PHASE

M-4: 700 CFM 1 HP 120 VOLT SINGLE PHASE


M-2 (2)FILTERS 103 SQ FT EACH TOTAL 206 SQ FT

M-4 (4) FILTERS 103 SQ FT EACH TOTAL 412 SQ FT

RPJ SERIES CARTRIDGE COLLECTOR REQUIRES MINIMUM 11 FEET OF CEILING HEIGHT

THE RPJ SERIES COLLECTORS ARE CARTRIDGE JET PULSE UNITS HAVING A DUST DRAWER OF PYRAMIDAL HOPPER. THEY CONSIST OF A FILTER SECTION, AND A DUST CONTAINMENT SECTION. THE TOP OF THE UNIT OPENS FOR INSTALLATION AND REMOVAL OF THE FILTER CARTRIDGES. THE AIR PULSING SYSTEM IS LOCATED ON THE SWING OPEN TOP. THE PRODUCT (DUST) STREAM ENTERS THROUGH THE INLET ON THE MAIN FILTER SECTION AND FLOWS AROUND THE CARTRIDGE FILTER MEDIA. SOLID PARTICLES ARE COLLECTED ON THE OUTSIDE OF THE FILTER MEDIA. THE AIR STREAM THEN PASSES THROUGH THE MEDIA INTO THE MIDDLE OF THE CARTRIDGE AND IS EXHAUSTED FROM THE COLLECTOR THROUGH THE EXHAUST FAN. COMPRESSED AIR JETS ARE USED PERIODICALLY TO SHOCK AND BACK FLUSH THE FILTER MEDIA CAUSING THE COLLECTED PARTICLES TO FALL INTO THE CONTAINMENT SECTION. THE DUST IS REMOVED FROM THE CONTAINMENT SECTION AS REQUIRED.
SHOWN WITH OPTIONAL HOPPER

 AVAILABLE WITH

2 HP 900 CFM EXHAUST FAN 

 5 HP 1200 CFM EXHAUST FAN
  FILTER CARTRIDGE PART NUMBER (006870)
 
RPJ2 / DRAWER

5'10" X 2'6" X 7'9"

 RPJ2 / HOPPER

5'10" X 2'6 X 12'6"

(2) 36" CARTRIDGES

AUTOMATIC REVERSE

PULSE CLEANING
 
OPTIONAL EQUIPMENT

 (010380) DRUM CONVERSION KIT FOR 55 GALLON

(007490) SOUND ATTENUATOR

(007482) HEPA FILTER
 

HEPA FILTERS (HEPA1)
HEPA1 / RATED UP TO 2000 CFM @ 1.5” SP DROP  

FINAL FILTRATION 99.97% @ .3 MICRON

THE HEPA1 CAN BE ATTACHED TO THE OUTLET OF A FAN

 WITH A FLEXIBLE CONNECTION



Industrial Series blast cabinets will deliver many years of low maintenance productivity . Our media valve and pistol grip blasting gun will provide a steady stream of media flow , reclaimer and dust collector systems will provide superior cabinet visibility  , superior media management and dust control by means of reclaimer separators and dust collector systems. Efficient blast cleaning is delivered while maintaining a clean surrounding work area. Production rates are determined by nozzle size, compressor output , working pressure, type and size of media, angle and distance of the nozzle from the blast surface. The Industrial Series blast cabinet incorporate a 3 component system 

1. Blast Cabinet
2.Reclaimer
3. Dust Collector

This element is no longer available.
This element is no longer available.
This element is no longer available.
This element is no longer available.
Blast Cabinets Blasting Cabinets